Sterilization devices
Laboklav 55-195
FLEXIBLE SOLUTIONS FOR HIGH DEMANDS.
The steam sterilizer is available in two chamber diameter options: Ø 400 mm (models 55, 80, and 100) or Ø 500 mm (models 135, 160, and 195). It can be configured both horizontally and vertically, depending on the spatial constraints and requirements of the installation site. With a power range of 3.3 to 10 kW, the sterilizers are suitable for a variety of applications, from smaller to more extensive sterilization tasks. The flexible design and powerful performance make it a versatile solution in sterilization technology.
Selected chamber diameter:
Laboklav 135, 160 und 195
Steam sterilization with chamber volumes from 135 to 195 liters
These three autoclaves with chamber volumes of 135, 160, and 195 liters provide optimal solutions for laboratories with varying sterilization requirements. These autoclaves in the series feature an integrated and performance-optimized steam generator with a power of 10 kW, which ensures shortened batch times through very rapid heating of both the autoclave chamber and the load.
versatile
equipped for the sterilization of liquids, solids (no narrow hollow bodies), and easily vented waste
compact design
available in various color options
adjustable
can be configured horizontally or vertically
available as a freestanding unit or a tabletop unit (conversion possible at any time)
efficient & durable
standard steam generator
Power 10 kW
integrated, high-performance steam generator that enables shortened batch times through rapid heating
available in different colors
blue/light gray
red/light gray
green/light gray
- high loading volume
- low electricity costs
The assumption that a large chamber automatically means a high loading capacity is widespread. However, especially when loading with liquids in 1-liter bottles, this is not always accurate. The more compact the device, the more expensive stainless steel is saved, and less heating power is required to bring the sterilization goods to the required temperature. During the cooling phase, only the energy that was previously introduced needs to be removed. The device is equipped with heating power that is optimally matched to the chamber size and processes. This adjustment of heating power leads to significant savings in operating costs and faster processes.
Product features and technical specifications
Sterilization chamber
Direct steam heating by integrated steam generator, indirectly steam heated via double jacket during preheating and drying
Lid and Closure
Hinged lid with motorized closure, safety locking
Lid seal
T-profile seal, silicone
Temperature measurement technology
Independent PT100 sensors with compensation time T0.9 = 3 s,
2-wire technology, internal resolution 0.01K, display resolution 0.1K,
calibratable Monitoring of sensor breakage and sensor short circuit
Reference sensor for liquids
Temperature sensor as described in temperature measurement technology with flexible measuring line, provided as standard in all models.
Calibration certificate according to ISO
inclusive across all devices
Pressure measurement technology
Electronic pressure sensor 0 to 6 bar, absolute pressure measurement or relative pressure measurement, programmable, monitoring of sensor breakage, resolution/display 0.1 kPa
Calibration certificate according to ISO
inclusive across all devices
Feed water supply
Integrated tank, integrated degassing, automatic filling and refilling of the tank, manual filling possible
Feed water pump
35 l/h, automatic feed from integrated storage tank
Water level control
Level sensors for low level and max level
Overtemperature protection for heating
2 independent systems: Temperature control of the heating via PT100, overtemperature protection by two separate overtemperature protection switches, one with autoreset and one without autoreset (unlockable only by a technician)
Sterilization ventilation
Membrane filter, µ ≤ 0.2 µm, included as standard in all models
Display of service intervals
Automatic notification via display
Microprocessor control
Control of all functions, status indication via graphical display
Safety circuit
For heating and chamber pressure monitoring
Timer
Program start programmable by date and time
Audible signal
Can be activated
Interfaces
Internal RS232 for printer
External RS485 for printer, network, computer connection
Sterilization programs
10 predefined programs in Level 1:
Program assignment depends on the configuration level. The programs can be modified individually.
10 programs in Level 2
Programs P11 to P20
Code-protected, pre-assigned like P1
2 test programs (P 11: Bowie & Dick test, P12: Vacuum test, only in vacuum versions)
additional special programs available upon request
CUSTOMER SERVICE is a top priority for us.
Our service network ensures short response times and competent service technicians with many years of experience in steam sterilization. Our fair prices and the service-friendly design of our devices keep costs low. We take care of your equipment.
